My Cart
My Account
CheckoutWHAT’S IN YOUR WATER?
HOW IT WORKS
Testing for PFAS has never been easier.
Simply fill the collection cup with water and allow it to drain completely. Place the cup back in the box with your sample details and return to Cyclopure using the prepaid shipping label.
IN THE LAB
We Go Low
Cyclopure tests for 55 PFAS analytes, including all 40 compounds covered under EPA Method 1633. We measure and quantify PFAS to a reporting limit of 1.0 ppt (1 ng/L), the lowest of any commercial lab. We have rated over 96% in sample consistency test scoring.
Water Test Kit for PFAS
$79.00
What’s in your water? Take the first step toward safe drinking water by testing for PFAS.
Share This
FREQUENTLY
ASKED QUESTIONS
What is the Cyclopure Water Test Kit Pro?
Our Water Test Kit Pro is designed to test for 55 PFAS Analytes using a DEXSORB® loaded extraction disc in the bottom filter. Using DEXSORB®, we can accurately measure and quantify the presence of short and long chain PFAS in a convenient point of site, time-specific extraction method.
DEXSORB® media extracts PFAS from contaminated waters through a unique adsorption mechanism – host-guest complexations. This occurs in the uniform 0.78-nm hydrophobic cavities of DEXSORB®, which are ideally suited to PFAS through size-inclusion, and excluding other contaminants like plastic particulates that are too large to fit (size-exclusion).
How are PFAS recovered and measured at the Cyclopure lab?
How many PFAS compounds does Cyclopure test for?
Cyclopure tests for 55 PFAS structures, including all 40 PFAS listed in EPA Methods 533, 537 and 1633.
What are the reporting limits of Cyclopure analytical methods?
The limit of quantification (LOQ) for each of the 55 PFAS tested under Cyclopure analytical methods is 1.0 ppt (ng/L). Reporting limits have been validated to the accuracy criteria of EPA methods, including Minimum Reporting Limit (MRL) confirmation.
Is Cyclopure’s testing a certified method?
Cyclopure testing for PFAS follows the same analytical methods using isotope dilution as other commercial labs and have been validated to EPA’s Demonstration of Capability Quality Control Requirements.
Prior to analysis on HPLC-MS/MS, Cyclopure and other commercial labs process water samples using standard SPE methods to extract and recover PFAS.
The difference in methods is that other labs peform PFAS extractions in lab on water samples collected by customers, while Cyclopure customers perform PFAS extractions in the field using the company’s DEXSORB®-loaded extraction disc. Field extraction avoids trip contamination; PFAS are adsorbed and securely locked into DEXSORB®’s cyclodextrin cups.
To be certified, a commercial lab must follow all of the procedures of EPA methods, including the shipment of water for analysis.
I notice that the collection cup is made of plastic. Will this affect my test results?
All components of the WTK are pre-conditioned and validated to be trace clean, analytical grade for accurate PFAS sampling, including the filter cup, glass fiber membranes, and the DEXSORB®-loaded PFAS extraction disc. No leaching of any other contaminants like plastics will occur during the PFAS sampling activities using our WTK.
Can I use Cyclopure’s Water Test Kit Pro to test surface waters?
Cyclopure’s Water Test Kit Pro can be used with equal performance and accuracy for surface waters, well water and tap water. Sample collection follows the same procedure of passing 250 mL of water through the collection cup.
How do I read my WTK Report?
